|
 |
|
| |
|
|
Gira Radio Controller.
A manager with spark.
The Gira radio controller is the central control and operating unit for the Gira radio bus system.
It receives and transmits radio messages. All the radio bus components can be accessed, programmed, interlinked and organised in groups via it.
Integrated devices such as lights and blinds can be managed and controlled centrally Individually or in a group, manually, by time switch or integrated in scenarios, e.g. all-ON or all-OFF. In addition the Gira radio controller disposes of an integrated radio clock with DCF77 receiver.
All the settings can be stored additionally on a chip card to increase the security and, if necessary, loaded back to the Gira radio controller, e.g. in order to undo changes.
|
|
| |
|
|
Gira Radio Transmitter.
Maximum mobility.
Up to 3 x 8 functions, such as the switching and dimming of lights or controlling Venetian blinds - even centrally - can be carried out. Up to five lighting scenarios can be saved and called up. The entire lighting scenario can also be dimmed with the "master dimming button". For more security, the manual radio transmitter also has a separate central off or panic switch.
|
|
| |
|
|
Gira Radio hand transmitter Mini.
The small remote control.
Two receivers or receiver groups of your choice can be controlled and switched with the small, robust radio-controlled manual transmitter mini, e.g. Venetian blinds or lights. A red LED indicates transmission activity. And discharge protection switches the radio-controlled transmitter mini off as soon as a button is pressed for longer than 13 seconds. The radio-controlled manual transmitter Mini can be connected to your key chain with an eyelet so that it is always handy.
|
|
| |
|
|
Gira Radio wall transmitter.
Independent of room and power.
The Gira radio wall transmitter can be installed exactly where you want it and where it is needed. Regardless of spatial conditions and power cables. It communicates with the consumers to be switched by means of radio. The number or buttons represent the number of functions that can be combined as you wish: switching, dimming, Venetian blinds control, and control of up to five lighting scenarios.
|
|
| |
|
|
Gira Radio wall transmitter
/ flat design.
Doesn’t stand out.
This radio wall transmitter is distinguished by its particularly low height and can be screwed directly to the wall without an additional housing being required. It can be stuck onto smooth surfaces such as glass and wood by means of a base plate. As a battery-operated device which is independent of mains connections, the radio wall transmitter can be positioned exactly where operating points are required. The functions switching, dimming, blinds control and light scenes can be assigned to its buttons.
In addition to being mounted as an individual device, the flat Gira radio wall transmitter can be used to supplement installed switches without caulking and plastering being necessary. It is simple mounted together with them in the next larger combination frame.
|
|
| |
|
|
Gira Radio universal transmitter 2.
Works in the background.
The mains-bound radio universal transmitter 2 detects the 230 V signals of conventional switches and push buttons and converts them to radio commands. Through an additional connection for the constant power supply, available at the installation site anyway, dimming telegrams are also possible. Through an additional connection for constant power supply, available at the installation site anyway, dimming telegrams are now also possible.
The compact device is located behind the inserts in the flush-mounted box. A deep flush-mounted box is required for a combination with electronic devices, such as blind control or room temperature controller. In this way, existing sensors can also be integrated into the Gira radio bus system. If desired, the system then controls the heating or the blinds centrally in the morning and evening, for example.
|
|
|
