Ground Floor Projects Seychelles

Gira push button sensor 3 Plus, 2-gang,
Gira Esprit, glass white/pure white

A wide range of connected bus functions can be controlled with the Gira push button sensor 3, such as externally saving and calling up of light scenes, switching and dimming lights and raising and lowering blinds. If requirements change, the push button assignment can be simply reprogrammed. The number of functions saved to a push button sensor depends on the number of its buttons. Each button can be inscribed to achieve clear assignment of what is controlled. The inscription space is discreetly backlit. This enables the push button sensor to be easily located in the dark and ensures that inscriptions are easily read at all times. Each button has two LEDs for status display and can be operated on the left, right and centrally, depending on the setting/variant. This results in lower costs: independent of device variant, the Gira push button sensor 3 only needs a single bus coupler.

The Gira push button sensor 3 Basic offers basic functions and the Comfort and Plus variants offer additional functions.

Gira push button sensor 3 Comfort

The Gira push button sensor 3 Comfort has extensive, practical software functions. The buttons have three-colour status LED in green, red and blue. The display colour for status can be selected globally and also for each individual button. In addition it is also possible to assign higher-level, prioritised status feedback e.g. for alarm messages or for information such as wind alarms. A temperature sensor is also integrated.

Gira push button sensor 3 Plus

The Gira push button sensor 3 Plus has an integrated room temperature controller, and a high-contrast, white-backlit graphic display shows temperature and status: controller status, diverse temperatures as well as texts and fault messages received via the KNX/EIB system can be displayed (configuration-dependent). An external temperature sensor for the floor heating for example can be connected together with the bus coupler 3 with external sensor connection.

Product Details

Two status LEDs per operating surface
Illumination of inscription space
Installation to bus coupler 3
Configuration and start-up from ETS3.0d, patch A
Disassembly safeguard via fastening
Neutral-colour inscription labels included
Temperature range: -5 °C to +45 °C
Protection class: III

Subject to technical modifications

Device Varients

The Gira push button sensor 3 is available in various models:

Push button sensor 3 Basic, 1-gang
Push button sensor 3 Basic, 2-gang
Push button sensor 3 Basic, 3-gang
Push button sensor 3 Comfort, 1-gang
Push button sensor 3 Comfort, 2-gang
Push button sensor 3 Comfort, 3-gang
Push button sensor 3 Comfort, 4-gang
Push button sensor 3 Comfort, 4-gang (2+2)
Push button sensor 3 Plus, 2-gang
Push button sensor 3 Plus, 3-gang (1+2)

Gira Inscription Service

An inscription can be designed and ordered online for selected Gira products in just a few steps at www.marking.gira.com. In this way the buttons of the Gira push button sensors 3 can also be conveniently and accurately inscribed with various texts.

For thermoplastic Gira push button sensors 3, the inscriptions are printed onto transparent inscription labels. These can be individually designed with ease and ordered directly online with just a few clicks at www.marking.gira.com. Customers then receive the printed plastic labels per post. Postage within Germany is free of charge. These labels are non-fading, wrinkle-free, weather-resistant and the size is optimally matched to the Gira push button sensor 3. They can be applied to the Gira push button sensor 3 with ease.

Alternatively the designs can be printed out by customers themselves. After the setting up of a free user account it's possible to save the designs so that they can be printed out, processed or ordered again at a later date.

For the Gira push button sensors 3 in stainless steel and aluminium, individually lasered inscriptions are possible. These can also be easily configured online by anybody. The setting up of a user account is needed for this. A configuration number is assigned following completion of the design. The rockers, inscribed as desired, can be simply ordered online with the Gira inscription service via the three-stage specialised sales process. End customers contact their specialist electrical shop with their configuration list.

› marking.gira.com/en/