The Gira radio energy and weather display can be equipped with five various sensors and adapters. These are available optionally and are not included in the scope of supply of the base station. The components can be selected according to requirements. In total, connection of seven sensors is possible: in addition to the outdoor sensor this includes up to three energy measurement adapters, an electricity meter sensor and a gas meter sensor. All sensors have a range of 100 metres (in free field).

The outdoor sensor is battery-powered, determines temperature and humidity in outdoor areas and transmits this information via radio to the energy and weather display. Temperature-measurement range: -30 °C to +70 °C.

The LAN adapter is plugged into a socket as an intermediate plug, connected to the local network with a cable and receives from the internet a reliable weather forecast for the next three days which is then transmitted via radio to the energy and weather display. The LAN adapter can also provide data regarding the regional outside temperature.

The energy adapter enables measuring the energy consumption of selected devices. Up to three of these intermediate plugs can be connected to the energy and weather display by radio.

The electricity meter sensor measures electricity consumption at the electricity meter and transmits this consumption data to the energy and weather display per radio.

The gas meter sensor measures gas consumption directly at the gas meter and transmits this consumption data to the energy and weather display per radio.

• Dimensions: W x H x D 55 x 127 x 19 mm
• Power supply: 3 V DC
• Batteries: 2 x 1.5 V round batteries (AA or LR6)
  (batteries included in the scope of supply are consumables and must be replaced regularly. Please observe the regulations when disposing of used batteries.)
• Temperature measurement range: ±0 °C to +50 °C
• Unit of measurement: °C or °F
• Current consumption: approx. 140 μA
• Reception frequency: 868.35 MHz
• Range: 100 m (in free field)
• Menu languages: German or English

• Dimensions: W x H x D 38 x 138 x 20 mm
• Temperature measurement range: -30 °C to +70 °C
• Measurement range of relative humidity +5 % to +95 %
• Operating voltage: 3 V DC
• Batteries: 2 x 1.5 V round batteries (AA or LR6)
  (batteries included in the scope of supply are consumables and must be replaced regularly. Please observe the regulations when disposing of used batteries.)
• Protection type: IP 44
• Transmission frequency: 868.35 MHz
• Range: 100 m (in free field)

• Dimensions: W x H x D 55 x 125 x 30 mm (without plug)
• Operating voltage: 230 V~ AC, 50 to 60 Hz
• Local network according to: Cat. 5/Cat. 6
• Transmission frequency: 868.35 MHz
• Range: 100 m (in free field)
• Standby power: ≤ 1 W

• Dimensions: W x H x D 55 x 125 x 30 mm
• Operating voltage: 230 V~ AC, 50 to 60 Hz
• Transmission frequency: 868.35 MHz
• Range: 100 m (in free field)
• Standby power: ≤ 1 W

• Dimensions: L x W x H 105 x 67 x 30 mm
• Power supply: 6 V DC
• Batteries: 4 x 1.5V AA round batteries, (LR6) (batteries included in the scope of supply are consumables and must be replaced regularly. Please observe the regulations when disposing of used batteries.)
• Connection possibilities for sensors: RJ11 socket
• Installation of transmitting unit: screw fastening next to meter
• Installation of sensor: with adhesive pads to meter
• Range: 100 m (in free field)

• Dimensions: L x W x H 105 x 67 x 30 mm
• Power supply: 6 V DC
• Batteries: 4 x 1.5V AA round batteries, (LR6) (batteries included in the scope of supply are consumables and must be replaced regularly. Please observe the regulations when disposing of used batteries.)
• Connection possibilities for sensors: RJ11 socket
• Installation of transmitting unit: screw fastening next to meter
• Installation of sensor: screw fastening
• Range: 100 m (in free field)

Subject to technical modifications